High-end type of the higher strength series
The DID HI-PWR-SHK roller chains have thicker website link plates than HI-PWR-S roller chains, and are the highest in tensile power and allowable load between common application chains, so becoming suitable for low pace heavy duty transmission.
Suggested uses
?The HI-PWR-SHK roller chains are 25 % greater in tensile power and 50 percent increased in highest allowable load compared to the typical roller chains, but since their excess weight is heavier, driving effectiveness declines at large velocity. So, they’re suitable for hefty duty at lower pace applications.

Multilevel parking machines, pipe benders, development machines, and so forth.
Selection of chains
Decide on a appropriate HI-PWR-SHK variety chain determined by “Low-speed selection”
HI-PWR-SHK series is accessible in simplex.
Sprockets
Typical sprockets for multiplex chains cannot be utilized.
Connecting hyperlinks and offset back links
The very best feature on the HI-PWR-SHK roller chains is large highest allowable load. As a result, interference-fitted connecting back links (H connecting links) with little power degradation are employed.
The connecting plate as well as the connecting pins are linked with spring pins. The tensile strength of an H connecting hyperlink is equivalent to that with the chain, however the allowable load is somewhat reduced than that of the chain.
HI-PWR-S type roller chains don’t have any offset website link. Use an even number of backlinks.
Hardly ever make the holes on the connecting plate larger and in no way make the pins thinner to facilitate the do the job for fitting the pins in to the connecting plate, considering that otherwise the fatigue power are going to be lowered.