Downsizing Your Process with Increased Power Chains
HK sort roller chains conform to H variety of ANSI, and their thickness of inner and outer website link plates are equal to those of the next more substantial size chain. Hence, HK variety roller chains are greater in tensile strength by about 20%and in greatest allowable load by about 15% than these of standard roller chains. Because the weight in the chains is also larger, HK style roller chains are ideal for your application of hefty duty at lower speed.
Encouraged utilizes
?Optimum for places exactly where higher strength is needed but big and heavier chains can’t be applied.
Choice of chains
Pick a right HK variety roller chain based upon “Low-speed selection”
For the maximum allowable load, see the next table of dimensions.
HK variety roller chains can be found up to triplex.
Sprockets
Use conventional sprockets to get a simplex HK roller chain Because the transverse pitches are bigger than individuals of conventional chains in the situation of duplex or triplex, normal sprockets can’t be employed. Refer towards the sprocket tooth profiles for HK
Connecting hyperlink and offset link
The tensile power of connecting links and offset backlinks are listed around the left, however the optimum allowable load is reduce than that in the base chain. Please seek the advice of us really should you’ve any issues. It truly is advised to make use of the connecting hyperlink of interference-fitted (FJ, HJ)
In no way make the holes from the connecting plate greater and under no circumstances make the pins thinner to facilitate the perform for fitting the pins in to the connecting plate, since otherwise the fatigue power will likely be lowered.
Variety of chains
Select a appropriate HK type roller chain depending on “Low-speed selection”
For the maximum allowable load, see the next table of dimensions.
HK sort roller chains are available up to triplex.
Sprockets
Use common sprockets to get a simplex HK roller chain Because the transverse pitches are bigger than people of conventional chains during the case of duplex or triplex, regular sprockets can not be made use of. Refer to your sprocket tooth profiles for HK
Connecting link and offset link
The tensile strength of connecting back links and offset links are listed within the left, however the maximum allowable load is lower than that of your base chain. Please seek advice from us need to you may have any inquiries. It can be advised to make use of the connecting hyperlink of interference-fitted (FJ, HJ)
Never make the holes from the connecting plate bigger and never ever make the pins thinner to facilitate the operate for fitting the pins to the connecting plate, considering that otherwise the fatigue strength will probably be lowered.