Power UNITS FOR DOUBLE-SCISSORS LIFT

Basic Description
Equipped using the zero leak bidirectional checking sole-noid valves, this electrical power unit is made for that operation of two independent circuits. Which are respectively for the principal and subordinate platforms of the double scissors lift. Two cut-off valves are employed for lowering the machine manually in case of electrical power reduction. If a lot more independent circuits are necessary to your application please speak to us for availability.
Remark: 1. Please seek advice from our income engineer for the different pump displacement, motor power or tank capacity.
two. CSA or UL licensed motors are available upon request.
Particular Notes
1. The AC motor is of S3 duty cycle, which could only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean the many hydraulic components concerned before set up of the energy unit.
three. Viscosity with the oil shoud be 15~46 cst,plus the oil really should be clean and cost-free of impurities,N46 hydraulic oil is advised.
four. The power unit must be mounted vertically.
5. Check the oil degree from the tank immediately after the first running in the power unit.
six. Oil shifting is needed after the first a hundred operation hrs,afterwards once each and every 3000 hrs.

Tags:

Recent Posts

Tyre Coupling

As one of Tyre Coupling manufacturers, suppliers and exporters of mechanical products, We offer tyre-coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of tyre-coupling.