Consisting of a strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is created to operate materials dealing with gear. The reducing movement is achived by the solenoid valve with all the decreasing velocity managed by an adjustable needle valve. The left and ideal functions are equipped which has a dual pilot operated verify valve and cross-over relief valves.
Remark: Please talk to our revenue engineer to the distinct pump displacement, motor electrical power or tank capacity.
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned ahead of set up of the electrical power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which must also be clean and no cost of impurities.N46 hydraulic oil is proposed.
four. This electrical power unit should be mounted horizontal.
5. Check the oil level while in the tank soon after the initial start off on the power unit.
6. Oil modifying is needed right after the preliminary a hundred operation hrs, afterwards when each and every 3000 hrs.