Materials Managing Power UNIT two
This electrical power unit features power up gravity down circuit. Activate the begin solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve with all the reducing pace controlled from the pressure compensated flow manage valve. Merchandise of this series may be widely used in the marketplace of logistic gadgets for instance fork lift, mini lift table, and so forth.
one. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned prior to mounting the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which should really also be clean and totally free of impurities, N46 hydraulic oil is encouraged .
four. Oil shifting is required after the preliminary a hundred operation hrs,afterwards the moment every 3000 hours.
five. The electrical power unit ought to be mounted horizontally.
Materials Handling Electrical power UNIT one
This energy unit is made to the fork lift sector, consisting of extremely efficient gear pump, DC motor, manual increase and lower valve, tank, ect. The up and down movement are controlled from the lever on the manual release valve, and that is equipped with an electric switch to activate the motor. The lowing velocity is controlled from the strain compensated flow manage valve.
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean all the hydraulic elements concerned before installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
4. Oil modifying is required immediately after the first 100 operation hrs, afterwards once just about every 3000 hrs.
5. The energy unit proven is designed to be mounted horizontally.