Any harm within the teeth surfaces of a sprocket diminishes the lifestyle with the conveyor chain.
With typical sprockets, considerably worn sprocket teeth had been repaired by teeth padding or even the whole sprocket was replaced. In both case, fix was costly and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent replacement. This sprocket is highly rated by our customers to the dramatic savings in expense and time.
The teeth might be replaced by two approaches: person tooth substitute or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on for the sprocket are spot-welded to stop loosening.
The respective structures are illustrated to the correct.
The above photograph plus the best proper illustration demonstrate a sprocket for personal tooth substitute. Since the joint face in between the replaced teeth and also the sprocket is formed inside a unique arc, the bonding accuracy is high as well as the sprocket power is enhanced. Furthermore, since the load acting within the mounting bolts is decreased, there’s much less possibility of loosening. This sprocket building is patented.
You will find two forms of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for huge sprockets receiving hefty loads and welded sheet steel hubs for other applications.