Product Description

Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling

Product Description

Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.

Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc

Coupling performance

1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CZPT requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.

How to select the appropriate coupling type

The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.

If you cannot determine the type, you can contact our professional engineer

Related products

Company Profile

Our Equipments

Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.

Machining equipments
Heat equipment

Our Factory
Application – Photos from our partner customers

Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p

Can Tyre Couplings Absorb Shock and Vibration in Rotating Equipment?

Yes, tyre couplings are designed to absorb shock and vibration in rotating equipment, making them well-suited for a wide range of industrial applications. The unique construction of tyre couplings allows them to effectively dampen vibrations and mitigate the impact of shock loads, providing several benefits to the connected machinery and equipment:

• Vibration Damping: The rubber tyre element in the coupling acts as a flexible medium that can deform slightly under dynamic loads. When the equipment experiences vibrations during operation, the rubber element absorbs and dampens these vibrations, preventing them from propagating through the connected shafts. This helps reduce vibration levels and minimizes the transmission of vibrations to other parts of the machinery.
• Mitigating Shock Loads: In many industrial applications, rotating equipment can experience sudden shock loads due to factors such as sudden starts, stops, or impacts with external objects. Tyre couplings are designed to handle such shock loads by providing a cushioning effect. The rubber tyre element can compress and absorb the energy generated by the shock, protecting the connected equipment from damage and preventing sudden stress on the shafts and bearings.
• Accommodating Misalignments: In addition to vibration damping and shock absorption, tyre couplings can also accommodate misalignments between the connected shafts. Misalignments may occur due to manufacturing tolerances, thermal expansion, or other factors. The flexibility of the rubber tyre element allows for a degree of angular, parallel, and axial misalignment, preventing excessive forces and wear on the machinery components.
• Extended Equipment Lifespan: By effectively absorbing vibrations and shock loads, tyre couplings contribute to the longevity of rotating equipment. Reduced vibration levels and lower stress on the components result in less wear and tear, leading to longer service life for bearings, seals, gears, and other critical parts.
• Smooth and Reliable Operation: Tyre couplings’ ability to dampen vibrations and absorb shock loads helps ensure smooth and reliable operation of the connected equipment. The reduction of vibration and noise levels can lead to improved operating conditions and enhanced overall performance.

Due to these advantageous characteristics, tyre couplings are commonly used in various industrial applications, including pumps, compressors, fans, conveyors, mixers, and other rotating equipment. The coupling’s ability to dampen vibrations and handle shock loads contributes to the overall efficiency, safety, and reliability of the machinery, making it a preferred choice for many industrial processes.

Real-world Applications and Success Stories of Tyre Couplings in Different Industries

Tyre couplings have found widespread use in various industries due to their exceptional performance and versatility. Here are some real-world applications and success stories of tyre couplings in different industries:

• Steel Industry: In steel mills, tyre couplings are employed in heavy machinery such as rolling mills and conveyor systems. The couplings’ ability to handle high torque, misalignments, and shock loads make them ideal for these demanding applications. Tyre couplings contribute to improved efficiency, reduced downtime, and increased productivity in steel manufacturing.
• Petrochemical Industry: Petrochemical plants utilize tyre couplings in pumps, compressors, and other rotating equipment. The couplings’ resistance to chemicals and wide temperature range allow them to operate reliably in aggressive environments. Tyre couplings have proven to be a cost-effective choice, reducing maintenance and enhancing safety in petrochemical facilities.
• Mining Industry: In mining operations, tyre couplings are employed in conveyors, crushers, and ball mills. These couplings can withstand the heavy loads and vibrations encountered in mining processes. Their ability to absorb shocks and accommodate misalignments contributes to prolonged equipment life and increased uptime in mining operations.
• Pulp and Paper Industry: Tyre couplings are widely used in pulp and paper mills, where they are applied in pumps, fans, and agitators. The couplings’ damping properties help reduce vibration and noise in these processes, leading to a more comfortable working environment for employees. They have also been instrumental in optimizing energy consumption in the pulp and paper industry.
• Power Generation: In power plants, tyre couplings are utilized in turbines, generators, and cooling tower fans. The couplings’ ability to accommodate misalignment and dampen vibrations enhances the performance and reliability of power generation equipment. Tyre couplings contribute to stable power generation and play a crucial role in meeting energy demands.
• Marine Industry: Tyre couplings are employed in various marine applications, including propulsion systems, thrusters, and deck machinery. The couplings’ compact design and ability to dampen vibrations are particularly advantageous on ships and offshore platforms, where space is limited, and smooth operation is essential for crew comfort and equipment longevity.
• Automotive Industry: In the automotive sector, tyre couplings are used in manufacturing processes such as assembly lines and paint booths. The couplings’ reliability and low maintenance requirements contribute to the smooth operation of automotive production facilities. Additionally, tyre couplings are employed in dynamometers for engine testing and development.
• Food and Beverage Industry: Tyre couplings are utilized in food processing equipment, including mixers, conveyors, and filling machines. Their ability to handle frequent starts and stops without causing damage to the machinery ensures the hygienic and efficient production of food and beverage products.

These are just a few examples of the extensive applications of tyre couplings across diverse industries. Their success stories are characterized by increased operational reliability, reduced maintenance costs, and improved machinery performance. The versatility and dependability of tyre couplings have made them a preferred choice for critical rotating equipment in various industrial sectors.

Advantages of Using Tyre Couplings in Industrial Applications

Tyre couplings offer several advantages that make them a popular choice for various industrial applications. These advantages include:

• Misalignment Tolerance: Tyre couplings can accommodate both angular and parallel misalignments between the connected shafts. This flexibility allows for easier installation and reduces the risk of damage to the shafts and bearings due to misalignment.
• Vibration Damping: The rubber tyre element in the coupling acts as a natural shock absorber, effectively dampening vibrations and minimizing the transmission of vibration to connected equipment. This feature is particularly beneficial in applications where vibrations could lead to premature wear and tear or compromise the integrity of nearby components.
• Shock Load Absorption: Tyre couplings are capable of absorbing shock loads that may occur during equipment start-up or sudden changes in operation. The flexible nature of the tyre helps protect the machinery and components from sudden impacts, enhancing the overall system’s reliability and longevity.
• Reduced Noise: The rubber tyre element’s ability to absorb vibrations contributes to noise reduction during operation. This advantage is especially valuable in environments where noise levels must be kept to a minimum for safety, comfort, or regulatory compliance.
• Simple Installation and Maintenance: Tyre couplings are relatively easy to install and require minimal maintenance. Their design allows for straightforward assembly and disassembly, making maintenance tasks more efficient and cost-effective.
• Cost-Effectiveness: Tyre couplings are a cost-effective solution for connecting shafts in various industrial systems. They offer high-performance characteristics at a reasonable price point, making them an attractive choice for budget-conscious projects.
• Machinery Protection: The ability to accommodate misalignments and dampen vibrations helps protect machinery and equipment from excessive stress, thereby extending their operational life and reducing downtime and maintenance costs.
• Flexibility: Tyre couplings can be used in a wide range of industrial applications, including motor-driven equipment, conveyors, compressors, pumps, fans, and many more. Their versatility makes them a practical choice for various industries and applications.

Overall, tyre couplings provide a reliable and efficient method for connecting shafts in industrial machinery and equipment. Their ability to handle misalignments, dampen vibrations, absorb shocks, and reduce noise makes them an excellent choice for improving system performance, enhancing machinery reliability, and minimizing maintenance requirements in diverse industrial settings.

editor by CX 2023-08-04