Product Description

Coupling

1. The couplings offer a range of hub and element selection to meet different demands.

2. They can absorb shock and cater for incidental misalignment and damp out small amplitude vibrations.

3. NBR, Urethane, Hytrel elements.

4. Customized requirement is available.

FFX Tyre coupling (Type B/F/H)

Main Products:

1. Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate; 

2. Forging, Casting, Stampling Part; 

3. V Belt Pulley and Taper Lock Bush; Sprocket, Idler and Plate Wheel;Spur Gear, Bevel Gear, Rack;  

4. Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.; 

5. Shaft Coupling: including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling, 
    Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint;  

6. Shaft Collars: including Setscrew Type, Single Split and Double Splits; 

7. Gear & Rack: Spur gear/rack, bevel gear, helical gear/rack.

8. Other customized Machining Parts according to drawings (OEM) Forging, Casting, Stamping Parts.

PACKING

Packaging
Packing	We use standard export wooden case, carton and pallet, but we can also pack it as per your special requirements.

OUR COMPANY
 

ZheJiang Mighty Machinery Co., Ltd. specializes in offering best service and the most competitive price for our customer.

After over 10 years’ hard work, MIGHTY’s business has grown rapidly and become an important partner for oversea clients in the industrial field and become a holding company for 3 manufacturing factories.

MIGHTY’s products have obtained reputation of domestic and oversea customers with taking advantage of technology, management, quality and very competitive price.

Your satisfaction is the biggest motivation for our work, choose us to get high quality products and best service.

OUR FACTORY

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample but the cost of freight on buyer’bill.

Q: What is your terms of payment ?

A: Payment=10000USD, 50% T/T in advance ,balance before shippment.

We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit.To supply customers excellent quality products with good price and punctual delivery time is our responsibility.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

View More

Can Tyre Couplings Absorb Shock and Vibration in Rotating Equipment?

Yes, tyre couplings are designed to absorb shock and vibration in rotating equipment, making them well-suited for a wide range of industrial applications. The unique construction of tyre couplings allows them to effectively dampen vibrations and mitigate the impact of shock loads, providing several benefits to the connected machinery and equipment:

• Vibration Damping: The rubber tyre element in the coupling acts as a flexible medium that can deform slightly under dynamic loads. When the equipment experiences vibrations during operation, the rubber element absorbs and dampens these vibrations, preventing them from propagating through the connected shafts. This helps reduce vibration levels and minimizes the transmission of vibrations to other parts of the machinery.
• Mitigating Shock Loads: In many industrial applications, rotating equipment can experience sudden shock loads due to factors such as sudden starts, stops, or impacts with external objects. Tyre couplings are designed to handle such shock loads by providing a cushioning effect. The rubber tyre element can compress and absorb the energy generated by the shock, protecting the connected equipment from damage and preventing sudden stress on the shafts and bearings.
• Accommodating Misalignments: In addition to vibration damping and shock absorption, tyre couplings can also accommodate misalignments between the connected shafts. Misalignments may occur due to manufacturing tolerances, thermal expansion, or other factors. The flexibility of the rubber tyre element allows for a degree of angular, parallel, and axial misalignment, preventing excessive forces and wear on the machinery components.
• Extended Equipment Lifespan: By effectively absorbing vibrations and shock loads, tyre couplings contribute to the longevity of rotating equipment. Reduced vibration levels and lower stress on the components result in less wear and tear, leading to longer service life for bearings, seals, gears, and other critical parts.
• Smooth and Reliable Operation: Tyre couplings’ ability to dampen vibrations and absorb shock loads helps ensure smooth and reliable operation of the connected equipment. The reduction of vibration and noise levels can lead to improved operating conditions and enhanced overall performance.

Due to these advantageous characteristics, tyre couplings are commonly used in various industrial applications, including pumps, compressors, fans, conveyors, mixers, and other rotating equipment. The coupling’s ability to dampen vibrations and handle shock loads contributes to the overall efficiency, safety, and reliability of the machinery, making it a preferred choice for many industrial processes.

Are there any Safety Considerations when Using Tyre Couplings?

When using tyre couplings in industrial applications, several safety considerations should be taken into account to ensure the well-being of personnel and the reliable operation of the machinery. Here are some important safety considerations when using tyre couplings:

• Proper Installation: Ensure that tyre couplings are installed correctly and according to the manufacturer’s guidelines. Improper installation can lead to coupling failure, misalignment, and potential hazards during operation.
• Regular Inspections: Conduct regular inspections of the coupling and its components to check for signs of wear, damage, or deterioration. Address any issues promptly to prevent potential failures or accidents.
• Torque Specifications: Follow the manufacturer’s recommended torque specifications when tightening coupling bolts. Over or under-tightening can lead to coupling slippage or failure.
• Temperature Limits: Operate the coupling within the specified temperature limits. Exceeding these limits can affect the material properties of the tyre and lead to premature failure.
• Speed Limits: Ensure that the coupling is used within its recommended speed limits. Operating the coupling at higher speeds than specified can result in excessive wear and potential failure.
• Proper Alignment: Misalignment can cause increased stresses on the coupling and connected machinery. Properly align the shafts and use coupling models with sufficient misalignment tolerance.
• Guarding and Safety Shields: Consider using guarding and safety shields around rotating coupling components to prevent accidental contact and protect personnel from potential hazards.
• Emergency Shutdown: Implement emergency shutdown procedures to stop the machinery quickly in case of coupling failure or other critical issues.
• Maintenance: Conduct regular maintenance as per the manufacturer’s recommendations. Lubrication, inspection, and replacement of worn components are essential to ensure safe and reliable operation.
• Proper Coupling Selection: Select the appropriate coupling size and type based on the application’s torque, speed, and misalignment requirements. Using an undersized or mismatched coupling can lead to premature failure.

Furthermore, safety protocols and guidelines provided by relevant authorities and regulatory bodies should be followed when operating machinery with tyre couplings. Adequate training of personnel involved in installation, operation, and maintenance is crucial to ensure their understanding of the coupling’s safe usage and handling.

By adhering to these safety considerations, industrial operators can mitigate risks and ensure the safe and efficient operation of machinery equipped with tyre couplings.

How to Properly Install and Maintain a Tyre Coupling?

Proper installation and maintenance of a tyre coupling are essential to ensure its reliable performance and longevity. Follow these steps for the correct installation and ongoing maintenance:

1. Inspect the Coupling: Before installation, carefully inspect the tyre coupling for any visible damage or defects. Check the rubber tyre element for signs of wear, cracks, or deterioration. Ensure that all components, including the hubs and fasteners, are in good condition.
2. Prepare the Shaft Ends: Clean and degrease the shaft ends that will be connected by the tyre coupling. Remove any dirt, rust, or debris to achieve a clean and smooth surface for proper coupling attachment.
3. Align the Shafts: Ensure the shafts to be coupled are properly aligned within the recommended tolerances. Misalignment can lead to premature wear and failure of the coupling. Follow the manufacturer’s guidelines for alignment specifications.
4. Insert the Tyre Element: Carefully place the rubber tyre element between the hubs of the tyre coupling. Align the hubs and the tyre element to ensure they fit together correctly.
5. Secure the Hubs: Assemble the coupling hubs around the tyre element and align them with the shaft ends. Use the appropriate fasteners (bolts or screws) and tighten them evenly and gradually in a criss-cross pattern to avoid uneven pressure on the tyre element.
6. Check for Uniform Gap: After tightening the fasteners, check for a uniform gap between the tyre element and the hubs on both sides. An even gap indicates that the tyre coupling is properly installed.
7. Lubrication: Some tyre couplings may require lubrication at the tyre-hub interface. Follow the manufacturer’s guidelines for the type and amount of lubricant to be used.
8. Perform a Test Run: After installation, perform a test run of the machinery to ensure the coupling operates smoothly without any abnormal vibrations or noises.

Maintenance:

1. Regular Inspection: Periodically inspect the tyre coupling for signs of wear, damage, or misalignment. Pay attention to the condition of the rubber tyre element and ensure it is free from cracks or degradation.
2. Torque Check: Check and retighten the fasteners at regular intervals to maintain the proper clamping force and prevent any loosening that could lead to coupling failure.
3. Lubrication: If the tyre coupling requires lubrication, adhere to the recommended lubrication schedule provided by the manufacturer.
4. Replace Worn Components: If any components, such as the rubber tyre element or fasteners, show signs of wear or damage, replace them promptly with compatible and high-quality replacements.
5. Address Misalignment: If there is any indication of misalignment during maintenance checks, take corrective measures to realign the shafts to prevent further coupling wear and potential equipment damage.
6. Keep the Environment Clean: Ensure the coupling area is kept clean and free from debris, which can contribute to premature wear and affect coupling performance.

By following proper installation procedures and conducting regular maintenance, a tyre coupling can deliver reliable and efficient performance, contributing to the smooth operation and extended lifespan of industrial machinery and equipment.

editor by CX 2024-03-14