Product Description
High Quality Rubber Shaft Tyre flexible Coupling For Mechanical Equipment
Features
Material: cast iron GG25, GG20 steel: C45
Parts: 2 couplings and 1 tire body.
Size from F40-F250. and Type: “B”, “F”, “H”.
Working temp: -20~80ºC
Transmission torque:10-20000N.M
Axial misalignment: D*2%
Radial deviation: D*1%
Angular misalignment:3°-6°
Application: tire couplings are usually used in wet, dusty, under attract, vibration, rotating, and complex working conditions. like: diesel pump
Installation: easy on, easy off.
Maintenance: no need for lubricating and durability.
Product Description
| Size | Type | Bush No. | MaxBore | Type F&H | Type H | Serve over Key |
A | C | D | F | M | |||
| mm | Inch | L | E | L | E | |||||||||
| F40 | B | – | 32 | – | – | – | 33 | 22 | M5 | 104 | 82 | – | – | 11 |
| F40 | F | 1008 | 25 | 1″ | 33 | 22 | – | – | – | 104 | 82 | – | – | 11 |
| F40 | H | 1008 | 25 | 1″ | 33 | 22 | – | – | – | 104 | 82 | – | – | 11 |
| F50 | B | – | 38 | – | – | – | 43 | 32 | M5 | 133 | 100 | 79 | – | 12.5 |
| F50 | F | 1210 | 32 | 1 1/4″ | 38 | 25 | – | – | – | 133 | 100 | 79 | – | 12.5 |
| F50 | H | 1210 | 32 | 1 1/4″ | 38 | 25 | – | – | – | 133 | 100 | 79 | – | 12.5 |
| F80 | B | – | 45 | – | – | – | 55 | 33 | M6 | 165 | 125 | 70 | – | 16.5 |
| F80 | F | 1610 | 42 | 1 5/8″ | 42 | 25 | – | – | – | 165 | 125 | 103 | – | 16.5 |
| F60 | H | 1610 | 42 | 1 5/8″ | 42 | 25 | – | – | – | 165 | 125 | 103 | – | 16.6 |
| F70 | B | – | 50 | – | – | – | 47 | 35 | M8 | 187 | 142 | 80 | 60 | 11.5 |
| F70 | F | 2012 | 50 | 2″ | 44 | 32 | – | – | – | 187 | 142 | 80 | 50 | 11.5 |
| F70 | H | 1810 | 42 | 1 5/8″ | 42 | 25 | – | – | – | 187 | 142 | 80 | 50 | 11.5 |
| F80 | B | – | 60 | – | – | – | 55 | 42 | M8 | 211 | 165 | 98 | 54 | 12.5 |
| F80 | F | 2517 | 80 | 2 1/2″ | 58 | 45 | – | – | – | 211 | 165 | 98 | 54 | 12.5 |
| F80 | H | 2012 | 50 | 2″ | 45 | 32 | – | – | – | 211 | 165 | 98 | 54 | 12.5 |
| F90 | H | – | 70 | – | – | – | 63.5 | 49 | M10 | 235 | 188 | 108 | 62 | 13.5 |
| F90 | F | 2517 | 60 | 2 1/2″ | 58.5 | 45 | – | – | – | 235 | 188 | 108 | 62 | 13.5 |
| F90 | H | 2517 | 60 | 2 1/2″ | 58.5 | 45 | – | – | – | 235 | 188 | 108 | 62 | 13.5 |
| F100 | H | – | 80 | – | – | – | 63.5 | 49 | M10 | 235 | 188 | 120 | 62 | 13.5 |
| F100 | F | 3571 | 75 | 3″ | 64.5 | 51 | – | – | – | 235 | 188 | 125 | 62 | 13.5 |
| F100 | H | 2517 | 60 | 2 1/2″ | 58.5 | 45 | – | – | – | 235 | 188 | 113 | 62 | 13.5 |
| F110 | B | – | 90 | – | – | – | 75.5 | 63 | M12 | 279 | 233 | 128 | 62 | 12.5 |
| F110 | F | 3571 | 75 | 3″ | 63.5 | 51 | – | – | – | 279 | 233 | 134 | 62 | 12.5 |
| F110 | H | 3571 | 75 | 3″ | 63.5 | 51 | – | – | – | 279 | 233 | 134 | 62 | 12.5 |
| F120 | B | – | 100 | – | – | – | 84.5 | 70 | M12 | 314 | 264 | 140 | 67 | 14.5 |
| F120 | F | 3525 | 100 | 4″ | 79.5 | 65 | – | – | – | 314 | 264 | 144 | 67 | 14.5 |
| F120 | H | 3571 | 75 | 4″ | 85.5 | 51 | – | – | – | 314 | 264 | 144 | 67 | 14.5 |
| F140 | B | – | 130 | – | – | – | 110.5 | 4 | M16 | 359 | 311 | 178 | 73 | 16 |
| F140 | F | 3525 | 100 | 4″ | 81.5 | 65 | – | – | – | 359 | 311 | 178 | 73 | 16 |
| F140 | H | 3525 | 100 | 4″ | 81.5 | 65 | – | – | – | 359 | 311 | 178 | 73 | 18 |
| F160 | B | – | 140 | – | – | – | 117 | 102 | M20 | 402 | 345 | 187 | 78 | 16 |
| F160 | F | 4030 | 115 | 4 1/2″ | 92 | 77 | – | – | – | 402 | 345 | 197 | 78 | 16 |
| F160 | H | 4030 | 115 | 4 1/2″ | 92 | 77 | – | – | – | 402 | 345 | 197 | 78 | 16 |
| F180 | B | – | 150 | – | – | – | 137 | 114 | M16 | 470 | 394 | 205 | 94 | 23 |
| F180 | F | 4536 | 125 | 5″ | 112 | 89 | – | – | – | 470 | 394 | 205 | 94 | 23 |
| F180 | H | 4535 | 125 | 5″ | 112 | 89 | – | – | – | 470 | 394 | 205 | 94 | 23 |
| F200 | B | – | 150 | – | – | – | 138 | 114 | M20 | 508 | 429 | 205 | 103 | 24 |
| F200 | F | 4535 | 125 | 5″ | 113 | 89 | – | – | – | 508 | 429 | 205 | 103 | 24 |
| F200 | H | 4535 | 125 | 5″ | 113 | 89 | – | – | 508 | 429 | 205 | 103 | 24 | |
| F220 | B | – | 160 | – | – | – | 154.5 | 127 | M20 | 562 | 474 | 223 | 118 | 27.5 |
| F220 | F | 5571 | 125 | 5″ | 129.5 | 102 | – | – | – | 562 | 474 | 223 | 118 | 27.5 |
| F220 | H | 5571 | 125 | 5″ | 129.5 | 102 | – | – | – | 562 | 474 | 223 | 118 | 27.5 |
| F250 | H | – | 190 | – | – | 161.5 | 132 | M20 | 628 | 522 | 254 | 125 | 29.5 | |
Related Products
Company Profile
FAQ
Q: How do you ship to us?
A: It is available by air, sea, or train.
Q: How do I pay the money?
A: T/T and L/C are preferred, with different currencies, including USD, EUR, RMB, etc.
Q: How can I know if the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Troubleshooting Common Issues with Tyre Couplings and Their Solutions
Tyre couplings, like any mechanical component, may encounter issues during their service life. Identifying and addressing these issues promptly is crucial to maintain the efficiency and reliability of the coupling and the connected machinery. Here are some common problems that may arise with tyre couplings and their potential solutions:
- 1. Misalignment: Misalignment between the shafts can lead to premature wear, increased vibration, and reduced coupling performance. Inspect the coupling for any signs of misalignment, such as abnormal wear on the tyre or coupling hubs. To solve this issue, realign the shafts within acceptable tolerances or consider using a tyre coupling with higher misalignment capability if necessary.
- 2. Excessive Vibration: Excessive vibration may indicate torsional vibration issues or misalignment. Check for any signs of damaged or worn components and ensure that the tyre coupling is adequately rated for the application’s speed and torque requirements. If vibration persists, consider using a tyre coupling with improved damping capabilities or consult with an engineer to identify the root cause.
- 3. Overheating: Overheating can be caused by excessive torque or overloading, inadequate ventilation, or operating beyond the temperature limits of the coupling. Verify that the coupling is appropriately sized for the application’s torque requirements and check for any obstructions hindering proper cooling. If the temperature exceeds the specified limits, consider using a high-temperature variant of the coupling or implementing cooling measures.
- 4. Abnormal Noise: Unusual noises, such as knocking or rattling, may indicate loose bolts, worn rubber elements, or misalignment. Inspect the coupling for loose connections and replace any damaged or worn parts. Additionally, verify the alignment and adjust if needed to eliminate the noise.
- 5. Cracks or Tears in the Tyre: Cracks or tears in the rubber tyre element can compromise the coupling’s flexibility and damping properties. Inspect the tyre regularly and replace it if any damage is detected. It is essential to use the correct replacement tyre recommended by the manufacturer.
- 6. Coupling Slippage: Slippage between the coupling and the shafts may occur due to inadequate tightening of the bolts or insufficient keying. Check the tightness of the bolts and ensure that they are torqued to the manufacturer’s specifications. If slippage persists, verify the keying or consider using a more secure keying method.
When troubleshooting tyre coupling issues, always refer to the manufacturer’s guidelines and technical documentation for specific solutions and recommendations. Regular inspections, preventive maintenance, and adherence to the manufacturer’s guidelines can help prevent and resolve problems, ensuring the smooth and efficient operation of tyre couplings and the connected machinery.
Can Tyre Couplings Accommodate Angular and Axial Misalignments Simultaneously?
Yes, tyre couplings are designed to accommodate both angular and axial misalignments simultaneously. The unique design of tyre couplings allows them to flex in multiple directions, making them highly versatile in compensating for various types of misalignments between the connected shafts.
The elastomeric tyre element of the coupling provides the necessary flexibility to accommodate angular misalignment. As the shafts rotate and their axes deviate from a perfect alignment, the tyre element deforms slightly to allow for the angular displacement. This helps reduce the reactive forces and torques that would otherwise be transmitted to the connected machinery, preventing excessive wear and damage.
Moreover, the tyre element’s elastic properties enable it to absorb axial misalignment as well. When one shaft moves axially relative to the other, the tyre element compresses or expands to accommodate the axial displacement. This feature is particularly beneficial in applications where axial movement is common, such as in reciprocating machinery.
By simultaneously accommodating angular and axial misalignments, tyre couplings help to minimize the stresses on the machinery and ensure smoother power transmission. However, it is essential to ensure that the misalignments are within the specified limits recommended by the coupling manufacturer to prevent overloading and premature wear of the coupling components.
In conclusion, tyre couplings are well-suited for applications with combined angular and axial misalignments, providing a reliable and efficient solution for power transmission in various industrial settings.
Materials Used in Manufacturing Tyre Couplings
Tyre couplings are designed to withstand various operating conditions, including high torque, misalignment, and shock loads. As a result, they are typically constructed using high-quality and durable materials. The primary materials used in manufacturing tyre couplings are:
- Cast Iron: Cast iron is a common material used for the hubs of tyre couplings. It offers excellent strength, rigidity, and durability, making it suitable for heavy-duty applications. Cast iron hubs provide a sturdy foundation for the coupling and ensure reliable power transmission.
- Steel: Steel is used in various components of the tyre coupling, including the fasteners, such as bolts and screws. Steel fasteners provide the necessary clamping force to secure the coupling assembly while withstanding the torque and forces experienced during operation.
- Rubber: The tyre element of the coupling is made from high-grade rubber or synthetic rubber materials. Rubber is selected for its flexibility, resilience, and ability to dampen vibrations. The rubber tyre element acts as a flexible medium that accommodates misalignment and absorbs shock loads, reducing stress on the machinery and components.
- Aluminum: Some lightweight tyre couplings may use aluminum for the hubs or other non-load-bearing components. Aluminum offers corrosion resistance and reduces the overall weight of the coupling, which can be advantageous in certain applications.
- Phenolic Resin: In some high-performance tyre couplings, phenolic resin may be used to reinforce the rubber tyre element. The addition of phenolic resin enhances the coupling’s torque transmission capacity and torsional stiffness, making it suitable for demanding applications.
It is essential to select the appropriate materials based on the specific requirements of the application. Factors such as the magnitude of torque, operating temperature, environmental conditions, and the presence of corrosive substances play a crucial role in determining the materials’ suitability for the tyre coupling.
Manufacturers follow stringent quality control procedures to ensure the materials used in tyre couplings meet industry standards and performance requirements. Proper material selection and quality manufacturing contribute to the durability, reliability, and efficiency of tyre couplings across a wide range of industrial applications.
editor by CX 2024-03-18