S-Flex Choice

Course of action
S-Flex Coupling Choice Method
The assortment method for figuring out the right S-Flex coupling necessitates utilizing the charts proven within the following pages. There are 3 components to be chosen, two flanges and one sleeve.
Data essential prior to a coupling is often selected:
HP and RPM of Driver or operating torque
Shaft size of Driver and Driven products and corresponding keyways
Application or tools description
Environmental conditions (i.e. severe temperature, corrosive conditions, room limitations)
Techniques In Selecting An S-Flex Coupling
Stage one: Determine the Nominal Torque in in-lb of the application by using the following formula:
Nominal Torque = (HP x 63025)/RPM
Stage 2: Applying the Application Support Issue Chart one select the service factor which ideal corresponds for your application.
Phase three: Determine the Style Torque of one’s application by multiplying the Nominal Torque calculated in Stage 1 from the Application Services Issue established in Phase two.
Design Torque = Nominal Torque x Application Services Aspect
Step four: Working with the Sleeve Performance Information Chart two select the sleeve materials which ideal corresponds for your application.
Stage 5: Applying the S-Flex Nominal Rated Torque Chart 3 locate the ideal sleeve material column for that sleeve selected in Stage 4.
Stage six: Scan down this column on the first entry the place the Torque Value during the column is greater than or equal towards the Design Torque calculated in Stage three.
Refer to your maximum RPM value in the coupling dimension to be sure that the application specifications are met. Should the maximum RPM value is much less than the application necessity, S-Flex couplings are usually not proposed for that application.
If Nominal Torque is significantly less than 1/4 with the coupling’s nominalrated torque, misalignment capacities are diminished by 1/2. The moment torque value is found, refer on the corresponding coupling size during the to start with column with the S-Flex Nominal Rated Torque Data Chart three .
Stage 7: Compare the application driver/driven shaft sizes on the maximum bore dimension readily available on the coupling selected. If coupling max bore is not really significant adequate to the shaft diameter, select the following biggest coupling which will accommodate the driver/driven shaft diameters.
Stage 8: Employing the Item Assortment tables, discover the ideal Keyway and Bore dimension expected and locate the number.


Recent Posts

Tyre Coupling

As one of Tyre Coupling manufacturers, suppliers and exporters of mechanical products, We offer tyre-coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of tyre-coupling.