Product Description

Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling

Product Description

Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.

Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc

Coupling performance

1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.

How to select the appropriate coupling type

The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.

If you cannot determine the type, you can contact our professional engineer

Related products

Company Profile

Our Equipments

Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.

Machining equipments
Heat equipment

Our Factory
Application – Photos from our partner customers

Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Understanding the Torsional Flexibility of Tyre Couplings and Its Significance

Torsional flexibility is a fundamental characteristic of tyre couplings, and it plays a crucial role in their successful operation in various industrial applications. Torsional flexibility refers to the coupling’s ability to flex and twist along its axis, allowing it to accommodate misalignments and dampen torsional vibrations between the connected shafts.

The significance of torsional flexibility in tyre couplings can be understood through the following points:

• Misalignment Compensation: In real-world applications, it is challenging to achieve perfect alignment between the shafts of connected equipment. Misalignments can occur due to factors such as thermal expansion, manufacturing tolerances, and settling of the machinery. Tyre couplings excel in compensating for these misalignments, both angular and parallel, as they can twist and flex within their rubber tyre element. This capability reduces the forces exerted on the shafts and bearings, minimizing wear and extending the life of the machinery.
• Torsional Vibration Damping: During the operation of rotating equipment, torsional vibrations can be generated due to sudden changes in load or speed. These vibrations can negatively impact the performance of the machinery and cause fatigue failure in critical components. Tyre couplings act as a damping medium, absorbing and dissipating torsional vibrations, resulting in smoother operation and reduced stress on the connected equipment.
• Protection against Shock Loads: In industrial processes, equipment may encounter sudden shock loads due to various factors. Tyre couplings can handle these shock loads by flexing and absorbing the energy generated during the impact. This capability prevents damage to the machinery and safeguards the drivetrain components from sudden stress and failure.
• Reduced Vibrations: Torsional flexibility in tyre couplings significantly reduces vibration transmission between connected shafts. This is especially important in applications where vibrations can negatively affect precision processes or lead to discomfort for operators. By damping these vibrations, tyre couplings contribute to improved productivity and operator comfort.
• Enhanced Equipment Lifespan: The ability to accommodate misalignments and dampen vibrations ultimately leads to reduced wear and tear on machinery components. As a result, equipment using tyre couplings tends to have a longer service life, minimizing downtime and maintenance costs.

In summary, the torsional flexibility of tyre couplings is a critical feature that allows them to compensate for misalignments, dampen torsional vibrations, and protect connected equipment from shock loads. This characteristic significantly contributes to the efficient and reliable operation of industrial machinery, making tyre couplings a popular choice in a wide range of applications.

What are the Potential Challenges of Using Tyre Couplings and How to Overcome Them?

While tyre couplings offer numerous advantages in various industrial applications, there are some potential challenges that users may encounter. Understanding these challenges and implementing appropriate solutions can help overcome them effectively. Here are some common challenges and ways to address them:

1. Temperature Limitations: Tyre couplings have specific temperature limits, and operating them beyond these limits can lead to premature wear and failure. To overcome this challenge, ensure that the operating temperature remains within the manufacturer’s recommended range. If the application involves extreme temperatures, consider using couplings with high-temperature resistant tyre materials.
2. Misalignment and Imbalance: Excessive misalignment or imbalance can cause uneven loading and accelerate tyre wear. Regularly inspect the machinery for misalignment issues and correct them promptly. Balancing the rotating components also helps in reducing the load on the tyre element, leading to longer coupling life.
3. Overload and Torque Spikes: Subjecting the coupling to overloads or sudden torque spikes can result in damage to the tyre element or other coupling components. Ensure that the coupling is adequately sized for the application and consider using torque-limiting devices to protect the coupling from sudden torque surges.
4. Chemical Exposure: In environments with aggressive chemicals, the tyre material may degrade or experience accelerated wear. Choosing a chemically resistant tyre material or providing additional protection, such as covers or guards, can help mitigate the effects of chemical exposure.
5. Lubrication and Maintenance: Tyre couplings generally require little maintenance. However, proper lubrication of the coupling and periodic inspections are essential to ensure optimal performance. Follow the manufacturer’s guidelines for lubrication intervals and inspection procedures.
6. Environmental Contaminants: Dirt, debris, and other environmental contaminants can accumulate in the coupling’s teeth or elastomeric element, leading to increased wear. Regularly clean the coupling and protect it from external contaminants to extend its service life.
7. Shaft Movement and End Float: Excessive shaft movement or end float can cause the coupling to bind or lead to premature failure. Properly secure the shafts and use appropriate coupling designs that can accommodate the required axial movement, if applicable.
8. Selection and Installation: Incorrect coupling selection or improper installation can lead to performance issues. Work closely with coupling manufacturers or experts to select the right coupling type and size for the application. Follow the manufacturer’s installation guidelines carefully to ensure proper coupling operation.
9. Environmental Conditions: Extreme environmental conditions, such as high humidity or aggressive outdoor environments, may affect the coupling’s performance. Select couplings with suitable protective features or take preventive measures, such as applying corrosion-resistant coatings, to enhance the coupling’s durability.

By addressing these potential challenges and following best practices in coupling selection, installation, and maintenance, users can maximize the reliability, efficiency, and service life of tyre couplings in their industrial applications.

Common Industries that Use Tyre Couplings in Their Machinery

Tyre couplings find widespread use in various industries due to their unique design features and performance advantages. Some of the common industries that extensively use tyre couplings in their machinery include:

• Manufacturing Industry: Tyre couplings are commonly employed in the manufacturing sector for various applications. They are used in conveyor systems to transfer materials along production lines. Additionally, tyre couplings play a vital role in powering pumps, compressors, fans, and other equipment used in different manufacturing processes.
• Chemical Industry: The chemical industry often requires machinery that can handle corrosive and aggressive environments. Tyre couplings are ideal for such conditions as they offer excellent resistance to corrosion and can operate smoothly in chemically challenging environments. They are used in chemical pumps, mixers, and agitators, among other equipment.
• Mining Industry: In the mining sector, machinery is subjected to heavy loads, shock loads, and harsh operating conditions. Tyre couplings provide the necessary shock load absorption and flexibility required to withstand the dynamic nature of mining equipment. They are used in conveyor systems, crushers, and ore processing machinery.
• Power Generation Industry: Power plants require reliable and efficient machinery to generate electricity. Tyre couplings are used in turbines, generators, and other power generation equipment to transmit torque and accommodate misalignments, ensuring smooth and uninterrupted power production.
• Pulp and Paper Industry: The pulp and paper industry involves a wide range of machinery for processing raw materials into paper products. Tyre couplings are used in paper machines, rollers, and other equipment involved in various stages of the papermaking process.
• Metal Processing Industry: Metal processing facilities use tyre couplings in rolling mills, extruders, and other equipment for metal forming and shaping processes. The couplings’ ability to dampen vibrations is particularly beneficial in metal processing applications.
• Marine Industry: Tyre couplings are commonly used in marine applications, such as propulsion systems for ships and boats. Their shock load absorption and misalignment tolerance make them suitable for marine environments, where the machinery may encounter rough seas and varying loads.
• Agricultural Industry: In the agricultural sector, tyre couplings are employed in various machinery used for crop harvesting, irrigation, and material handling. Their ability to withstand outdoor conditions and accommodate misalignments is valuable in agricultural equipment.
• Construction Industry: Construction equipment, such as concrete mixers, pumps, and cranes, often use tyre couplings to handle the heavy loads and dynamic operating conditions encountered in construction projects.

These are just a few examples of the diverse industries that benefit from using tyre couplings in their machinery. The flexibility, shock load absorption, and misalignment tolerance of tyre couplings make them a preferred choice in numerous applications across different sectors, contributing to the reliable and efficient operation of industrial equipment.

editor by CX 2024-02-19